Wednesday, October 22, 2008

CMPhone with Nokia N82/E61

Finally it works after a lot of trials and errors! Below are the settings:

Menu > Tools > Settings > Connection > SIP settings
Profile name: CMPhone
Service profile: IETF
Default access point: [Your Access Point]
Public user name: sip:852xxxxxxxx@202.0.179.3
Use compression: No
Registration: Always on
Use security: No

Proxy server
Proxy server address: sip:202.0.179.3
Realm: huawai
User name: 852xxxxxxxx
Password: [Your Password]
Allow loose routing: No
Transport type: UDP
Port: 5060

Registrar server
Registrar server address: sip:202.0.179.3
Realm: huawai
User name: 852xxxxxxxx
Password: [Your Password]
Transport type: UDP
Port: 5060

Yeah! Next is to integrate the service into IP-based PABX.

3 comments:

Unknown said...

I'm trying your config but didn't work. Have you successful make a internet SIP call using your Nokia phone.?

Unknown said...

Would you help and share how you can connect CM Phone using Nokia.?
my email dluk316@gmail.com

William Lee said...

In fact, the setup is okay only for inbound calls. For outbound calls, because Nokia SIP agent software does not support outbound proxy, it is not possible to work with CM Phone.

Workaround is to use a Linksys router with a customized image to make a transparent proxy. This route all requests to allow outbound proxy requests to be possible.